{"title":"Planters","description":"\u003cp\u003eSculptural planters 3D printed to order in Louisville, Kentucky. Ribbed and fluted pots with drainage, in the same matte colors as our lamps, trays, and bowls, so every plant on the shelf matches the rest of the room. Available in small, medium, and large.\u003c\/p\u003e","products":[{"product_id":"ribbed-planter-with-legs-mid-century-fluted-plant-pot","title":"Ribbed Planter with Legs – Mid-Century Fluted Plant Pot","description":"\u003ch2 style=\"text-align: center;\"\u003eGive Your Plant a Seat at the Table\u003c\/h2\u003e\n\u003cp\u003eMost planters sit. This one stands. The Ribbed Planter with Legs lifts a fluted, rounded pot onto four slim contrasting legs, so your plant reads like a piece of mid-century furniture instead of a pot on a shelf. It is 3D printed in matte PLA with deep vertical ribs that catch the light all the way around, and the legs come in a warm contrasting tone that plays like wood against the body.\u003c\/p\u003e\n\u003cp\u003eAt 5.1 inches across and about 5.2 inches tall on its legs, it is sized for the plants people actually keep on a desk, a windowsill, a console or a bedside table: pothos, snake plant pups, succulents, a small dracaena, an herb cutting. Drop in a standard 3-inch nursery pot and the planter hides it completely.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRaised on four legs: air and light under the pot, and a silhouette that looks styled from every angle\u003c\/li\u003e\n\u003cli\u003eDeep fluted ribs around the full body, a signature of our lamp and decor collection\u003c\/li\u003e\n\u003cli\u003eFits a standard 3-inch nursery pot, or plant directly with a layer of pebbles at the bottom\u003c\/li\u003e\n\u003cli\u003eSix body finishes, each with contrasting legs: Jade White, Matte Black, Deep Indigo Blue, Moss Green, Burnt Rust and White Marble\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBody: 5.1 in diameter x 3.9 in tall (13.0 x 10.0 cm); about 5.2 in (13.3 cm) tall overall on the legs\u003c\/li\u003e\n\u003cli\u003eOpening: 3.4 in (8.6 cm) inner diameter; inner floor 2.6 in (6.7 cm)\u003c\/li\u003e\n\u003cli\u003eFits: standard 3 in nursery pots\u003c\/li\u003e\n\u003cli\u003eDrainage: no drainage hole. Use as a planter cover with a nursery pot inside, or plant directly over a pebble layer and water lightly\u003c\/li\u003e\n\u003cli\u003eMaterial: 3D printed PLA, matte finish. Body and four legs; legs are permanently bonded — arrives assembled\u003c\/li\u003e\n\u003cli\u003eLegs: Burnt Rust on all bodies, Matte Black on the Burnt Rust body\u003c\/li\u003e\n\u003cli\u003eCare: wipe with a soft dry or slightly damp cloth. Indoor use only — keep away from radiators and prolonged direct sun. Water-resistant, not waterproof: avoid standing water\u003c\/li\u003e\n\u003cli\u003eMade to order in Louisville, Kentucky. Ships to the United States and Canada\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it have a drainage hole?\u003c\/strong\u003e No. It is designed as a planter cover: keep your plant in its 3-inch nursery pot, set it inside, and lift it out to water. If you plant directly, add a layer of pebbles and water sparingly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat size plant fits?\u003c\/strong\u003e Anything sold in a 3-inch nursery pot: pothos, small snake plants, succulents, small dracaena, herbs and cuttings. A 4-inch pot will not fit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it go outdoors?\u003c\/strong\u003e No. PLA softens in prolonged direct sun and heat, so keep it indoors and away from radiators and south-facing windowsills in summer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo the legs come attached?\u003c\/strong\u003e Yes. The four legs are permanently bonded to the body before shipping, so it arrives ready to use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill water damage it?\u003c\/strong\u003e Occasional splashes and damp soil are fine. Standing water for days is not, so empty any excess after watering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it match the lamps?\u003c\/strong\u003e Yes — the fluted ribs and the matte colors are the same as the Ribbed table lamps and the Ripple Tray, so you can build a matched shelf or desk set.\u003c\/p\u003e","brand":"DiyArts","offers":[{"title":"Jade White","offer_id":49018723205342,"sku":"DA-PLANTER-RIBBED-JADE","price":38.0,"currency_code":"USD","in_stock":true},{"title":"Matte Black","offer_id":49018723238110,"sku":"DA-PLANTER-RIBBED-BLACK","price":38.0,"currency_code":"USD","in_stock":true},{"title":"Deep Indigo Blue","offer_id":49018723270878,"sku":"DA-PLANTER-RIBBED-BLUE","price":38.0,"currency_code":"USD","in_stock":true},{"title":"Moss Green","offer_id":49018723303646,"sku":"DA-PLANTER-RIBBED-GREEN","price":38.0,"currency_code":"USD","in_stock":true},{"title":"Burnt Rust","offer_id":49018723336414,"sku":"DA-PLANTER-RIBBED-RUST","price":38.0,"currency_code":"USD","in_stock":true},{"title":"White Marble","offer_id":49018723369182,"sku":"DA-PLANTER-RIBBED-MARBLE","price":38.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0792\/0504\/0350\/files\/ImagendeCodex10sept2026_03_34_41p.m..png?v=1789070109"},{"product_id":"coin-stack-planter-with-drip-tray-4-inch-ribbed-plant-pot-with-drainage","title":"Coin Stack Planter with Drip Tray – 4 Inch Ribbed Plant Pot with Drainage","description":"\u003ch2 style=\"text-align: center;\"\u003eReal Drainage. No Puddle. No Saucer in Sight.\u003c\/h2\u003e\n\u003cp\u003eMost beautiful planters make you choose: drainage holes and a saucer that ruins the look, or a sealed pot that slowly drowns the roots. The Coin Stack Planter does neither. It is 3D printed in matte PLA as a two-piece system: a fluted pot built from five stacked ribbed rings with seventeen drainage holes in its floor, and a matching drip tray that locks underneath and disappears into the silhouette. Water drains, the tray catches it, and from the outside all you see is a sculptural stack of coins.\u003c\/p\u003e\n\u003cp\u003eThe pot takes a standard 4-inch nursery pot, which covers most of what a plant shop sells for a desk, windowsill or shelf: succulents, pothos, snake plants, peperomia, small ferns and herbs. Lift the pot off the tray, empty it, set it back. It pairs with the Ribbed Planter with Legs for a matched set in the same colors.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSeventeen drainage holes in the floor: healthy roots, no guesswork about overwatering\u003c\/li\u003e\n\u003cli\u003eHidden drip tray locks under the pot: catches runoff, never shows, lifts off to empty\u003c\/li\u003e\n\u003cli\u003eFits a standard 4-inch nursery pot, or plant directly — the drainage is built in\u003c\/li\u003e\n\u003cli\u003eFive stacked ribbed rings: catches light like a fluted vase, reads as one sculptural piece\u003c\/li\u003e\n\u003cli\u003eSix matte finishes, pot and tray in the same color\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePot: 5.7 in diameter x 3.9 in tall (14.5 x 10.0 cm); opening 4.1 in (10.4 cm) inner diameter\u003c\/li\u003e\n\u003cli\u003eDrip tray: 5.7 in diameter x 1.3 in tall (14.5 x 3.2 cm); about 4.9 in (12.5 cm) tall assembled\u003c\/li\u003e\n\u003cli\u003eFits: standard 4 in nursery pots\u003c\/li\u003e\n\u003cli\u003eDrainage: 17 holes in the pot floor, runoff collected in the hidden tray\u003c\/li\u003e\n\u003cli\u003eMaterial: 3D printed PLA, matte finish. Two pieces, no tools — the tray locks on with a quarter turn\u003c\/li\u003e\n\u003cli\u003eCare: wipe with a soft dry or slightly damp cloth. Indoor use only — keep away from radiators and prolonged direct sun. Empty the tray after watering\u003c\/li\u003e\n\u003cli\u003eMade to order in Louisville, Kentucky. Ships to the United States and Canada\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it really drain?\u003c\/strong\u003e Yes. The pot floor has seventeen holes and the tray underneath collects the runoff. It is designed to be watered in place.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat size plant fits?\u003c\/strong\u003e Anything sold in a 4-inch nursery pot. You can drop the nursery pot straight in or plant directly into the pot.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the tray visible?\u003c\/strong\u003e No. It matches the pot's color and profile and sits flush underneath, so the planter reads as one piece.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is it different from the Ribbed Planter with Legs?\u003c\/strong\u003e The Ribbed Planter is a 3-inch planter cover with no drainage, raised on legs. The Coin Stack is a 4-inch planter with real drainage and a hidden tray — the one for people who water generously.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it go outdoors?\u003c\/strong\u003e No. PLA softens in prolonged direct sun and heat, so keep it indoors and away from radiators and hot south-facing windowsills.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it match the lamps and trays?\u003c\/strong\u003e Yes — the fluted ribs and the six matte colors are the same as the Ribbed lamps, the Ripple Tray and the Ribbed Planter, so you can build a matched shelf.\u003c\/p\u003e","brand":"DiyArts","offers":[{"title":"Jade White","offer_id":49018907459806,"sku":"DA-PLANTER-COIN-JADE","price":54.0,"currency_code":"USD","in_stock":true},{"title":"Matte Black","offer_id":49018907492574,"sku":"DA-PLANTER-COIN-BLACK","price":54.0,"currency_code":"USD","in_stock":true},{"title":"Deep Indigo Blue","offer_id":49018907525342,"sku":"DA-PLANTER-COIN-BLUE","price":54.0,"currency_code":"USD","in_stock":true},{"title":"Moss Green","offer_id":49018907558110,"sku":"DA-PLANTER-COIN-GREEN","price":54.0,"currency_code":"USD","in_stock":true},{"title":"Burnt Rust","offer_id":49018907590878,"sku":"DA-PLANTER-COIN-RUST","price":54.0,"currency_code":"USD","in_stock":true},{"title":"White Marble","offer_id":49018907623646,"sku":"DA-PLANTER-COIN-MARBLE","price":54.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0792\/0504\/0350\/files\/ImagendeCodex11sept2026_10_14_42a.m..png?v=1789136138"},{"product_id":"voronoi-square-planter-with-drip-tray-modern-cube-plant-pot-with-drainage","title":"Voronoi Square Planter with Drip Tray – Modern Cube Plant Pot with Drainage","description":"\u003ch2 style=\"text-align: center;\"\u003eThe Drainage Is the Design\u003c\/h2\u003e\n\u003cp\u003eMost drip trays are something you hide. This one is the part you notice first. The Voronoi Square Planter is 3D printed in matte PLA as a two-piece system: a rounded cube pot with a rough, stone-like textured surface and a single drainage hole, sitting on a low base whose four sides are cut into an openwork Voronoi lattice, the cellular pattern you see in dragonfly wings and cracked earth. Water drains through the hole into the base, the lattice hides the runoff and lets air move under the pot, and from the outside it reads like a small sculpture.\u003c\/p\u003e\n\u003cp\u003eAt just under 4 inches square it is sized for the plants that live on desks, windowsills and bookshelves: succulents, small snake plants, peperomia, pothos cuttings, a young ficus. It takes a 3 to 3.5-inch nursery pot, or plant directly — the drainage is built in. Pair it with the Coin Stack Planter or the Ribbed Planter with Legs for a matched set in the same six colors.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eReal drainage: one hole in the pot floor, runoff collected in the lattice base\u003c\/li\u003e\n\u003cli\u003eVoronoi base: an openwork cellular pattern on all four sides, structural and decorative at once\u003c\/li\u003e\n\u003cli\u003eTextured cube: a fine rough surface on the pot that reads like cast stone and hides fingerprints\u003c\/li\u003e\n\u003cli\u003eFits a 3 to 3.5-inch nursery pot, or plant directly\u003c\/li\u003e\n\u003cli\u003eSix matte finishes, pot and base in the same color\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePot: 3.9 x 3.9 in, 3.3 in tall (10.0 x 10.0 x 8.5 cm); opening 3.6 in (9.2 cm) square\u003c\/li\u003e\n\u003cli\u003eBase: 4.4 x 4.4 in, 2.0 in tall (11.3 x 11.3 x 5.1 cm); about 4.6 in (11.7 cm) tall assembled\u003c\/li\u003e\n\u003cli\u003eFits: 3 to 3.5 in nursery pots\u003c\/li\u003e\n\u003cli\u003eDrainage: single hole in the pot floor, runoff collected in the base\u003c\/li\u003e\n\u003cli\u003eMaterial: 3D printed PLA, matte finish. Pot has a fine rough textured surface; base is smooth. Two pieces, the pot rests on the base — no tools\u003c\/li\u003e\n\u003cli\u003eCare: wipe with a soft dry or slightly damp cloth; a soft brush clears dust from the lattice. Indoor use only — keep away from radiators and prolonged direct sun. Empty the base after watering\u003c\/li\u003e\n\u003cli\u003eMade to order in Louisville, Kentucky. Ships to the United States and Canada\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it really drain?\u003c\/strong\u003e Yes. The pot floor has a drainage hole and the base underneath collects the runoff, hidden behind the lattice. Water it in place and empty the base now and then.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat size plant fits?\u003c\/strong\u003e Anything sold in a 3 or 3.5-inch nursery pot. A 4-inch pot will not fit. You can drop the nursery pot straight in or plant directly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the base attached?\u003c\/strong\u003e No. The pot sits in a recess on top of the base, so you can lift it off to empty the tray. Nothing to assemble.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy is the pot rough and the base smooth?\u003c\/strong\u003e The pot is 3D printed with a fine textured surface so it reads like cast stone and hides fingerprints; the base is smooth so the Voronoi lattice stays crisp. Both are the same matte PLA color.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it go outdoors?\u003c\/strong\u003e No. PLA softens in prolonged direct sun and heat, so keep it indoors and away from radiators and hot south-facing windowsills.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it match the other planters?\u003c\/strong\u003e Yes — the six matte colors are the same as the Coin Stack Planter and the Ribbed Planter with Legs, and the lattice echoes the Lattice Catch-All Bowl.\u003c\/p\u003e","brand":"DiyArts","offers":[{"title":"Matte Black","offer_id":49023341265118,"sku":"DA-PLANTER-VORONOI-BLACK","price":46.0,"currency_code":"USD","in_stock":true},{"title":"Jade White","offer_id":49023341297886,"sku":"DA-PLANTER-VORONOI-JADE","price":46.0,"currency_code":"USD","in_stock":true},{"title":"Deep Indigo Blue","offer_id":49023341330654,"sku":"DA-PLANTER-VORONOI-BLUE","price":46.0,"currency_code":"USD","in_stock":true},{"title":"Moss Green","offer_id":49023341363422,"sku":"DA-PLANTER-VORONOI-GREEN","price":46.0,"currency_code":"USD","in_stock":true},{"title":"Burnt Rust","offer_id":49023341396190,"sku":"DA-PLANTER-VORONOI-RUST","price":46.0,"currency_code":"USD","in_stock":true},{"title":"White Marble","offer_id":49023341428958,"sku":"DA-PLANTER-VORONOI-MARBLE","price":46.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0792\/0504\/0350\/files\/hf_20260911_184240_3b3d76a5-154a-47c0-92e0-a61c1f0a35cb.png?v=1789155596"},{"product_id":"fluted-cylinder-planter-with-saucer-4-inch-ribbed-plant-pot-with-drainage","title":"Fluted Cylinder Planter with Saucer – 4 Inch Ribbed Plant Pot with Drainage","description":"\u003ch2 style=\"text-align: center;\"\u003eThe Classic Fluted Pot, Finally With a Saucer That Belongs\u003c\/h2\u003e\n\u003cp\u003eA fluted cylinder is the most-loved planter shape for a reason: it looks right with every plant and in every room. The problem has always been the saucer, an afterthought in the wrong color. The Fluted Cylinder Planter is 3D printed in matte PLA as a matched two-piece system: a tall ribbed pot with seven drainage holes in its floor, and a saucer in a contrasting tone that the pot sits into, so the base band reads as part of the design rather than a dish under it.\u003c\/p\u003e\n\u003cp\u003eAt 4.7 inches wide and 4.1 inches tall, this is the biggest planter in our collection, sized for the plants people actually buy: a 4-inch nursery pot drops straight in. Peace lily, pothos, philodendron, snake plant, a small monstera or a full herb. Water it in place, let it drain, empty the saucer. Pair it with the Coin Stack, the Voronoi or the Ribbed Planter with Legs for a matched set in the same six colors.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSeven drainage holes in the floor: healthy roots, no guesswork about overwatering\u003c\/li\u003e\n\u003cli\u003eMatching saucer in a contrasting tone: catches runoff and completes the silhouette\u003c\/li\u003e\n\u003cli\u003eFits a standard 4-inch nursery pot, or plant directly\u003c\/li\u003e\n\u003cli\u003eDeep vertical fluting all the way around, the signature of our lamp and planter collection\u003c\/li\u003e\n\u003cli\u003eSix pot colors, each with a contrasting saucer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePot: 4.7 in diameter x 4.1 in tall (12.0 x 10.5 cm); opening 3.96 in (10.1 cm) inner diameter\u003c\/li\u003e\n\u003cli\u003eSaucer: 4.7 in diameter x 1.0 in tall (12.0 x 2.6 cm); about 4.8 in (12.2 cm) tall assembled\u003c\/li\u003e\n\u003cli\u003eFits: standard 4 in nursery pots (3.5 in with room to spare)\u003c\/li\u003e\n\u003cli\u003eDrainage: 7 holes in the pot floor, runoff collected in the saucer\u003c\/li\u003e\n\u003cli\u003eMaterial: 3D printed PLA, matte finish. Two pieces, the pot sits into the saucer — no tools\u003c\/li\u003e\n\u003cli\u003eSaucer color: Burnt Rust on all pots, Matte Black on the Burnt Rust pot\u003c\/li\u003e\n\u003cli\u003eWeight: about 9.8 oz (277 g)\u003c\/li\u003e\n\u003cli\u003eCare: wipe with a soft dry or slightly damp cloth. Indoor use only — keep away from radiators and prolonged direct sun. Empty the saucer after watering\u003c\/li\u003e\n\u003cli\u003eMade to order in Louisville, Kentucky. Ships to the United States and Canada\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it really drain?\u003c\/strong\u003e Yes. The pot floor has seven holes and the saucer underneath collects the runoff. It is designed to be watered in place.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat size plant fits?\u003c\/strong\u003e Anything sold in a 4-inch nursery pot, which is most houseplants at a plant shop. You can drop the nursery pot in or plant directly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the saucer attached?\u003c\/strong\u003e No. The pot sits into a lip on the saucer so it stays centered, and lifts off to empty. Nothing to assemble.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I get the saucer in the same color as the pot?\u003c\/strong\u003e The standard set pairs a contrasting saucer with each pot. Message us if you want a matching one — it is made to order, so we can usually do it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it go outdoors?\u003c\/strong\u003e No. PLA softens in prolonged direct sun and heat, so keep it indoors and away from radiators and hot south-facing windowsills.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it match the lamps and other planters?\u003c\/strong\u003e Yes — the fluting and the six matte colors are the same as the Ribbed table lamps, the Ripple Tray and the rest of the planter collection.\u003c\/p\u003e","brand":"DiyArts","offers":[{"title":"Jade White","offer_id":49040254533854,"sku":"DA-PLANTER-FLUTED-JADE","price":48.0,"currency_code":"USD","in_stock":true},{"title":"Matte Black","offer_id":49040254566622,"sku":"DA-PLANTER-FLUTED-BLACK","price":48.0,"currency_code":"USD","in_stock":true},{"title":"Deep Indigo Blue","offer_id":49040254599390,"sku":"DA-PLANTER-FLUTED-BLUE","price":48.0,"currency_code":"USD","in_stock":true},{"title":"Moss Green","offer_id":49040254632158,"sku":"DA-PLANTER-FLUTED-GREEN","price":48.0,"currency_code":"USD","in_stock":true},{"title":"Burnt Rust","offer_id":49040254664926,"sku":"DA-PLANTER-FLUTED-RUST","price":48.0,"currency_code":"USD","in_stock":true},{"title":"White Marble","offer_id":49040254697694,"sku":"DA-PLANTER-FLUTED-MARBLE","price":48.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0792\/0504\/0350\/files\/hf_20260912_200809_28587ef5-c7ed-4cf8-9642-57b16727a373.png?v=1789245885"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0792\/0504\/0350\/collections\/Imagen_de_Codex_12_sept_2026_01_21_53_p.m..png?v=1789234001","url":"https:\/\/diyarts.store\/collections\/planters.oembed","provider":"DiyArts","version":"1.0","type":"link"}