Waisted Fluted Planter with Stand – 5 Inch Hourglass Ribbed Plant Pot

Pinched at the Waist, Lifted on a Stand

The Waisted Fluted Planter takes a fluted cylinder and pinches it in the middle, so the ribs flare out at the rim, narrow at the waist and flare again at the base. It is 3D printed in matte PLA and set on a slim cross stand in a contrasting tone that lifts it about an inch and a half off the surface, the mid-century move that turns a planter into a small piece of furniture.

At 5.1 inches across and about 5.8 inches tall on its stand, it is the largest of our small-planter family and takes a standard 4-inch nursery pot. It works on a console, a sideboard, a bookshelf or a desk. It is a planter cover — keep your plant in its nursery pot, set it inside, lift it out to water. It pairs with the Twisted Planter with Stand and the Chubby Fluted Planter for a matched set in the same six colors.

• Hourglass silhouette: ribs flare at the rim, pinch at the waist, flare again at the base
• Cross stand in a contrasting tone: two pieces that slot together, no tools
• Fits a standard 4-inch nursery pot (3.5-inch with room to spare)
• Console and shelf sized: 5.1 in wide, about 5.8 in tall on the stand
• Six pot colors, each with a contrasting stand

Specifications

• Pot: 5.1 in diameter x 4.4 in tall (13.0 x 11.1 cm); opening 4.25 in (10.8 cm)
• Stand: 5.8 x 5.8 in footprint, about 1.5 in tall; about 5.8 in (14.8 cm) tall assembled
• Fits: standard 4 in nursery pots
• Drainage: no drainage hole — a planter cover. Keep the plant in its nursery pot and lift it out to water, or plant directly over a pebble layer and water lightly
• Material: 3D printed PLA, matte finish. Pot printed as a single continuous wall; stand in two slotted pieces
• Stand color: Matte Black on all pots, Burnt Rust on the Matte Black pot
• Weight: about 3.5 oz (99 g)
• Care: wipe with a soft dry or slightly damp cloth. Indoor use only — keep away from radiators and prolonged direct sun. Water-resistant, not waterproof: avoid standing water
• Made to order in Louisville, Kentucky. Ships to the United States and Canada

FAQs

Does it have a drainage hole? No. It is designed as a planter cover: keep your plant in its 4-inch nursery pot, set it inside, and lift it out to water.

What size plant fits? Anything sold in a 4-inch nursery pot, which is most houseplants at a plant shop, and 3.5-inch pots with room to spare.

Does the stand come assembled? The two stand pieces slot together in a cross in seconds and the pot rests on top. No tools, no glue.

Can I get the stand in the same color as the pot? The standard set pairs a contrasting stand with each pot. Message us if you want them matching — it is made to order, so we can usually do it.

How big is it really? About the size of a large coffee mug on a stand: 5 inches wide, under 6 inches tall. It is meant for a console, shelf or desk, not the floor.

Can it go outdoors? No. PLA softens in prolonged direct sun and heat, so keep it indoors and away from radiators and hot south-facing windowsills.